Repair Mortars
Rust Stop
Rust Stop is a protective anti-corrosion coating designed for reinforcing steel. It forms a protective layer that prevents further corrosion before concrete repair work.
- Prevents corrosion
- Suitable for existing rusted reinforcement
- Protects steel before concreting
- Easy brush application
- Good adhesion
100 ml— ₹90.00500 ml— ₹370.001 L— ₹680.00
Applications
Common application areas for this product.
Repair
Bonding
Benefits
Key advantages of using Rust Stop on your project.
Halts ongoing corrosion on rusted rebar
Easy brush application directly on prepared steel
Forms a strong bonding surface for repair mortars
Application & Dosing Instructions
Mixing guidelines and application procedures for best results on site.
Step-by-Step Instructions
- 1Clean the steel surface thoroughly of loose rust and scale.
- 2Mix cement and sand with Rust Stop in 1:1 ratio (by volume).
- 3Apply the mix onto the steel using a stiff brush.
- 4Ensure a dry coating thickness of approximately 1.5 mm.
Specifications
Technical specification values for Rust Stop.
| Property | Value |
|---|---|
| Type | Protective anti-corrosion coating for steel |
| Mix Ratio | Cement : Sand : Rust Stop = 1 : 1 (by volume) |
| Coating Thickness | Approx. 1.5 mm dry coating |
| Pot Life | 30 minutes at 30°C |
| Available Pack Sizes | 100 ml, 500 ml, 1 L |
Related Products
Repair Mortars
De-Rusto
Single-component rust remover that chemically removes corrosion while leaving a phosphate coating for paint adhesion.
View Details
Waterproofing
Latex M.P.
Water-resistant polymer emulsion additive formulated to improve adhesion, flexibility, impact resistance and waterproofing in cement mortars.
View Details
Primers
Epoxy Bond Master
Two-component solvent-free epoxy bonding agent for structural bonding between old and new concrete.
View DetailsReady to Build Stronger, Longer-Lasting Structures?
Whether you're a contractor, builder, distributor, or homeowner, our team is ready to help you choose the right waterproofing solution.